-- This module defines enterprise MIBs for DHCP Configuration
-- 
-- Copyright (c) 1999-2004, Juniper Networks, Inc.
-- All rights reserved.

NETSCREEN-SET-DHCP-MIB DEFINITIONS ::= BEGIN

IMPORTS
--PSIM(Modif)     netscreenSettingMibModule
    netscreenSettingMibModule, netscreenSetting
        FROM NETSCREEN-SMI
    Integer32, MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    DisplayString
        FROM SNMPv2-TC
    ;

netscreenSetDhcpMibModule MODULE-IDENTITY
    LAST-UPDATED  "200405032022Z" -- May 03, 2004
    ORGANIZATION
        "Juniper Networks, Inc."
    CONTACT-INFO
        "Customer Support

         1194 North Mathilda Avenue 
         Sunnyvale, California 94089-1206
         USA

         Tel: 1-800-638-8296
         E-mail: customerservice@juniper.net
         HTTP://www.juniper.net"
    DESCRIPTION
        "This module defines the object that are used to monitor all
         the configuration info"
    REVISION      "200405030000Z" -- May 03, 2004
    DESCRIPTION
        "Modified copyright and contact information"
    REVISION      "200403030000Z" -- March 03, 2004
    DESCRIPTION
        "Converted to SMIv2 by Longview Software"
    REVISION      "200311100000Z" -- November 10, 2003
    DESCRIPTION
        "Correct wrong title"
    REVISION      "200112120000Z" -- December 12, 2001
    DESCRIPTION
        "change dhcp configuration per physical interface"
    REVISION      "200109280000Z" -- September 28, 2001
    DESCRIPTION
        "No Comment"
    REVISION      "200105270000Z" -- May 27, 2001
    DESCRIPTION
        "Creation Date"
    ::= { netscreenSettingMibModule 5 }

NsSetDhcpEntry ::= SEQUENCE
{
    nsSetDhcpIfIdx       Integer32,
    nsSetDHCPService     INTEGER,
    nsSetDHCPRelayServer DisplayString,
    nsSetDHCPVpnEncryp   INTEGER,
    nsSetDhcpIfInfo      Integer32
}

nsSetDHCP OBJECT IDENTIFIER ::= { netscreenSetting 5 }

nsSetDhcpTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF NsSetDhcpEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "NetScreen ScreenOS can allow dhcp service on each of NetScreen
         device's physical interface. This table collects the dhcp
         configuration on each physical interface."
    ::= { nsSetDHCP 1 }

nsSetDhcpEntry OBJECT-TYPE
    SYNTAX        NsSetDhcpEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Hold the firewall setting attribute."
    INDEX
        { nsSetDhcpIfIdx }
    ::= { nsSetDhcpTable 1 }

nsSetDhcpIfIdx OBJECT-TYPE
    SYNTAX        Integer32 (0..2147483647)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "unique interface id."
    ::= { nsSetDhcpEntry 1 }

nsSetDHCPService OBJECT-TYPE
    SYNTAX        INTEGER {
        none(0),
        dhcp-relay-agent(1),
        dhcp-server(2)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "DHCP service type for trusted network."
    ::= { nsSetDhcpEntry 2 }

nsSetDHCPRelayServer OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..128))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "DHCP relay agent server name."
    ::= { nsSetDhcpEntry 3 }

nsSetDHCPVpnEncryp OBJECT-TYPE
    SYNTAX        INTEGER {
        disable(0),
        enabled(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Secure DHCP relay agent traffic via VPN encryption."
    ::= { nsSetDhcpEntry 4 }

nsSetDhcpIfInfo OBJECT-TYPE
    SYNTAX        Integer32 (0..2147483647)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Internal id assigned to this interface. Stays persistent across resets."
    ::= { nsSetDhcpEntry 5 }

END